Skip to main content

Programs

Biosafety Program

The university is responsible for establishing specific policies and procedures to be applied in all laboratories working with biohazardous materials or infectious agents. The university's Biosafety Program is designed to ensure safe work practices are being followed in conformity with generally accepted Biosafety standards and guidelines and legislative requirements under the Human Pathogens and Toxins Act and the Occupational Health and Safety Act. The Biosafety Committee is the regulatory oversight committee for the program and ensures compliance through risk assessments of proposed work, reviewing applications for work with biological agents, designating appropriate levels of containment for facilities and recommending operational best practices and procedures.

Chemical and Laboratory Safety

The university is responsible for ensuring the proper management and safe use of hazardous materials in research and teaching laboratories. The operation of laboratories exposes workers to a wide range of hazards and risks, including physical hazards and chemicals. The Chemical and Laboratory Safety programs set out the minimum standards and requirements in establishing procedures and controls to eliminate or minimize those risks. These include, but are not limited to, outlining responsibilities and general safety rules, training, selection of personal protective equipment, laboratory design requirements and the safe handling, use, storage and disposal of hazardous materials.

Emergency Resource Management

The management of health and safety is an integral part of management and supervisory activities. The purpose of this procedure is to ensure employee emergency resources have been trained and properly assigned to university buildings as an essential component of an effective emergency preparedness plan, and to meet any applicable legislated requirements. Employee emergency resource members have the opportunity to be trained in being a First Aid/CPR Responder, Fire Warden and/or Defibrillator Responder. 

Ergonomics and Safe Computer Use

Our university is a technology-enriched institution utilizing many tools to enhance the teaching, learning and working environment. Frequent computer use is one risk factor that can lead to certain types of injuries associated with poor work postures, repetitive movements and eye strain. The Ergonomics and Safe Computer Use section of the website has been developed to help faculty, staff and students assess their workplace conditions by providing resources that can assist them in setting up their workstations for a more efficient and safe work environment.

Noise Control Program

The university is responsible, under the Occupational Health and Safety Act, for identifying and controlling workplace hazards for the protection of workers. The Regulations for Industrial Establishments (Regulation 851) set out minimum requirements for the control of noise. The Noise Control and Hearing Conservation Program is designed to identify and control all noise hazard areas and protect workers and students from developing noise-induced hearing loss. The university's standards are adopted from the current recommendations of the American Conference of Governmental Industrial Hygienists and represent a current consensus of good occupational hygiene practice.

Radiation Safety Program

The university's Radiation Safety Program is designed to protect all faculty, staff, students and the public from the hazards associated with exposures to ionizing radiation, like radioactive materials and X-rays. The program is developed to conform with the legislative requirements as set out in the Nuclear Safety and Control Act, applicable Canadian Nuclear Safety Commission regulations, and the X-ray Safety regulations under the Occupational Health and Safety Act. The Radiation Safety Committee is the regulatory oversight committee responsible for administering the Radiation Safety Program, as well as the Laser Safety Program, based on the American National Standard for the Safe Use of Lasers (ANSI Z136.1).

Safety Week

For the second consecutive year, the Human Resources and Health and Safety departments will host Safety Week, an event designed to educate and encourage all faculty, staff and students to create and maintain a safe workplace. We encourage everyone to to participate in the various planned activities. This year, Safety Week will run Tuesday, September 5 through Friday, September 8.

University of Ontario Institute of Technology logo